Manual Controllers

Display

Explanation of parameter

Factory Setting

Setting Range

Engine Max RPM

Max. permissible RPM, above this the RPM is treated unhealthy & the Generator is stopped.

1650

300-3000

Engine O/RPM Delay

The time for which the Generator RPM should, continuously be unhealthy to generate a fault condition

10Sec.

1-999 Sec.

Engine Vbelt RPM

Max. permissible Vbelt RPM, above this the RPM is treated unhealthy & the Generator is stopped.

300

300-600

V belt Delay

The time for which the Vbelt RPM should, continuously be unhealthy to generate a fault Condition

10Sec

1-999 Sec.

Available Sensor

This select the installed sensors in the Gensets. The display shall only display the parameters for the sensor installed and uninstalled sensor data shall not be displayed. The protection for the function with no measurement sensor installed shall be through switch. Eg. If Oil pressure sensor is not installed the unit shall provide protection for LLOP through oil pressure switch and not through the oil pressure sensor (linear measurement)

All sensors

All sensors,

Fuel Level in %

Level of fuel at which the Engine shall shut down

11%

10-100%

Low Lube Pressure

Level of LLOP at which the Engine shall shut down

1.0 Kg/Cm²

0-8.5 Kg/Cm²

High Water Temp

Temperature of water at which the Engine shall shut down

95

0-150 Degree centigrade

Sensor Type

Select sensor as in accordance with engine

A

A,B

Surge 1.2/50Usec

2.5KV

Battery Voltage

Suitable for 12V/24 VDC System

Min. voltage to power on

9V

Min Running Voltage after Power on

4V

Max. Battery Voltage

35V

DC Interruption time

1 Sec.

Digital Output

+ 12V

Cut out Dimensions

92mm X 92mm

Depth

120mm

Digital Input Level battery + Ve

Battery -Ve except Charging Alt, which is