Manual Controllers

Next > >

Manual Controllers

Send Inquiry

Product Code : BGS-2

Brand Name : MRM PROCOM

Product Description

To deal with increasing market demand, we are engaged in offering Manual Controllers. Provided controllers are manufactured by our adroit engineers using pristine quality components and competitive techniques. Our quality engineers also check these controllers to deliver them defect free at the clients end. These controllers are mainly used for controlling as well as for monitoring various electrical parameters. As per the convenience of clients, we are providing these Manual Controllers at the most budgeted prices.

Features:

Manually operated
Easy to operate
Reliable results
Rugged design

Manual Controllers

Protection, Supervision Salient features

Charging Alternator Fail/V-Belt
Oil Pressure
Run Hour (Optional). The charging alternator and LLOP Sensor should be connected to the system for this to work
HWT
RWL
Emergency
DG Over/Under Frequency
Low Fuel

Measurement & Display

BGS-2 equipped with LCD display and displays
Radiator Temp in degree centigrade
Generator Frequency
Fuel Level in %
Battery Voltage
Programmed settings
RPM
Run Hour (Optional)
Oil Pressure in KG/cm²

Normally the display auto scrolls and displays a set of parameter for 10 seconds, but any time the Next key (^) can be pressed to select the next parameter window.

Parameter Mode

Display	Explanation of parameter	Factory setting	Setting Range
Generator O/F	Over frequency setting	65 Hz	40 - 80 Hz
Gen O/F Delay	Monitoring time for Over frequency	5 Sec.	1-999Sec.
Generator U/F	Under frequency setting	45 Hz	40 - 80 Hz
Gen U/F Delay	Monitoring time for Under frequency	10 Sec.	1-999Sec.
Fuel Level in %	Level of fuel at which the Engine shall shut down	20% Sec.	10-100%
Fuel << delay	Monitoring time of Fuel Fault	5 Sec.	1-999Sec.
Low Lube Pressure	Level of LLOP at which the Engine shall shut down	2.0 Kg / Cm²	0-8.5 Kg / Cm²
LLOP delay	Monitoring time of LLOP Fault	5 sec.	1-999 sec.
High Water Temp.	Temperature of water at which the Engine shall shut down	80	0-150 Degree centigrade
HWT delay	Monitoring time of HWT Fault	5 Sec	1-999 Sec

Specifications

AC voltage withstand	330 VAC (Phase to neutral)
Measurement Accuracy
Voltage	1%
Surge 1.2/50 Usec	2.5KV
Battery Voltage	Suitable for 12V System
Min. voltage to power on	9V
Max. Battery Voltage	15V
DC Interruption time	0.5Sec.
Cut out Dimensions	92mm X 92mm
Depth	120mm
Digital Input Level	Battery Voltage (Negative) except Charging Alt, which is battery supply