Manual Controll System

Next > >

<< Previous

Send Inquiry

Product Code : DES-11

Brand Name : MRM PROCOM

Product Description

Manual Controllers

Protection, Supervision Salient features

Voltage monitoring and protection for under/over voltage and over speeding.
Emergency
Low Fuel
Oil Pressure
Charging Alternator Fail/V-Belt
HWT
Fan Fault protection(1Ph model B)
Canopy Temperature/RWL
Over Load

Measurement & Display

DES-11 equipped with LCD display and displays
Generator voltage (Ph-N, Ph-Ph)
Radiator Temp in degree centigrade(Model -A)
Generator Frequency
Generator Current
Fuel Level
Fan Current(1Ph Model B)
Programmed settings
Battery Voltage
KW
Generator Run Hour
PF
RPM
KWhr
Oil Pressure in KG/cm

Normally the display auto scrolls and displays a set of parameter for 10 seconds, but any time the Next key (^) can be pressed to select the next parameter Window.

Parameter Mode

Display	Explanation of parameter	Factory setting	Setting Range
Generator O/V	Max. Permissible voltage, above this the voltage is treated unhealthy & the Generator is stopped.	270 V	80-300 V
Generator U/V	Min. Permissible voltage, below this the voltage is treated unhealthy & the Generator is stopped.	180 V	80-300 V
Gen Sup Delay	The time for which the Generator voltage should, continuously be unhealthy to generate a fault condition.	10 Sec	1-999 Sec.
CT Ratio	Available in models having provision for /5 CTs. Not required for Procom Make CTs	1	1-999
Generator O/C	Max. Permissible current, above this the current is treated unhealthy & the Generator is stopped	6(For /5 A CT) 42A (for Procom CT)	1-999(for / 5 A CT) 1-199 A (for Procom CT)
Gen O/C delay	The time for which the Generator Current should, continuously be unhealthy to generate a fault condition.	5Sec.	1-999 Sec.
Generator S/C	Max. Permissible current, above this the Current is treated unhealthy & the Generator is stopped	6 (For /5 A CT) 42A (for Procom CT)	1-999 (for /5 A CT) 1-199 A (for Procom CT)
Gen S/C Delay	The time for which the Generator Current should, continuously be unhealthy to generate a fault condition.	5Sec	1-999 Sec.
Generator O/F	Over frequency setting	65 Hz	40- 80 Hz
Gen O/F Delay	Monitoring time for Over frequency	5 Sec.	1-999 Sec.

Specifications

AC voltage withstand	330 VAC (Phase to neutral)
Measurement Accuracy Voltage & Current	1%
Power & KWh	2%
Surge 1.2/50Usec	2.5KV
Battery Voltage	Suitable for 12V/24 VDC System
Min. voltage to power on	9V
Min Running Voltage after Power on	4V
Max. Battery Voltage	35V
DC Interruption time	1 Sec.
Digital Output	+ 12V
Cut out Dimensions	92mm X 92mm
Depth	120mm
Digital Input Level which is battery supply	Battery Voltage (Negative) except Charging Alt